9408200056 fog lamp is identified across European truck parts catalogues as a left bumper fog light for MERCEDES-BENZ Atego and Axor models, typically supplied without bulb but ready to accept a 24 V H3 light source and mount into the original bumper aperture. Listings for A9408200056 and related aftermarket references consistently group this lamp with Atego and Axor front lighting, confirming its role as the standard left fog light on many 2004–2013 medium and heavy-duty chassis.:contentReference[oaicite:0]{index=0}

Housing and lens geometry on the 9408200056 fog lamp are designed to concentrate a wide, low beam close to the road surface, cutting through rain, mist and spray at modest speeds without dazzling oncoming traffic. Suppliers describe the unit as a bumper-mounted fog lamp rather than a driving light, making it suitable for regional distribution work, construction supply runs and mixed urban routes where close-range visibility around the front of the truck is critical in poor weather.:contentReference[oaicite:1]{index=1}

Multiple manufacturers in the replacement market cross-reference their own part numbers to the 9408200056 fog lamp, including European brands that specify fitting position “links / left” and use it together with a matching right lamp under 9408200156. This broad cross-reference network gives wholesalers and export traders confidence that a product labelled to replace 9408200056 will match MERCEDES-BENZ mounting points, bumper contours and connector layouts on Atego and Axor vehicles built roughly between 2004 and 2013.:contentReference[oaicite:2]{index=2}

Because the 9408200056 fog lamp is recognised by many catalogues as a shared component for both Atego and Axor ranges, using this part number as the central identifier allows fleets and distributors to consolidate stock, simplify listings and reduce the chance of side-mixing errors when servicing MERCEDES-BENZ trucks in diverse operating regions.:contentReference[oaicite:3]{index=3}

• Standardise front fog-light supply by using the 9408200056 fog lamp as your main reference for left bumper lamps on MERCEDES-BENZ Atego and Axor fleets, aligning warehouse labels and online listings around the same OE-style code.
• Combine 9408200056 fog lamp units with matching right-hand references in palletised kits for export dealers who routinely repair damaged bumpers on regional haulage and construction vehicles.
• Take advantage of the wide cross-reference base for 9408200056 fog lamp replacements when negotiating long-term purchasing agreements, keeping pricing competitive while maintaining consistent fitment.:contentReference[oaicite:4]{index=4}
• Pre-pack pairs of lamps, brackets and basic fastener sets so workshops can complete front-end fog-light repairs in a single visit, reducing truck downtime and improving service throughput.
• Use clearly printed part numbers and model tags such as “MERCEDES-BENZ Atego & Axor 2004–2013” on all cartons containing the 9408200056 fog lamp to cut picking errors in busy distribution centres.

• Park the MERCEDES-BENZ Atego or Axor on level ground, apply the parking brake and follow workshop rules to isolate the 24 V system before touching the wiring or the 9408200056 fog lamp.
• Access the left bumper recess from the front or rear, depending on the cab version, and remove any covers or screws holding the old fog lamp in place while supporting the unit to avoid straining the harness.
• Disconnect the electrical connector, then inspect terminals, seals and wiring for moisture, corrosion or overheating; remedy any damage before installing the new 9408200056 fog lamp to prevent future faults.
• Position the replacement lamp in the bumper opening, ensuring locating tabs and screw holes line up with the MERCEDES-BENZ mounting points, and tighten fixings evenly so the lamp face sits flush with the bumper surface.
• Install the correct H3 bulb, reconnect the harness and restore power; test fog-light operation and, if adjustable, set the beam height so the fog lamp illuminates the road directly ahead without excessive upward glare.:contentReference[oaicite:5]{index=5}

• Primary reference 9408200056 – left fog lamp for MERCEDES-BENZ Atego and Axor trucks, typically configured as a 24 V H3 halogen bumper light used in front lighting packages for 2004–2013 vehicles.:contentReference[oaicite:6]{index=6}
• Common formatted equivalents include 940 820 00 56 and A 940 820 00 56, with catalogues and fog-light specialist sites listing A9408200056 as a directly compatible part number for the same lamp position.:contentReference[oaicite:7]{index=7}
• Aftermarket manufacturers such as ALKAR, HERTH+BUSS ELPARTS, STARLINE and ABAKUS all show their left fog-light references cross-linked to 9408200056, reinforcing its role as the key identifier in multi-brand catalogues.:contentReference[oaicite:8]{index=8}

The 9408200056 fog lamp is intended as a service replacement left bumper fog light for MERCEDES-BENZ Atego and Axor trucks and, when installed correctly with the specified H3 bulb, is designed to support safe low-level illumination in poor weather conditions.

• Optical design of the 9408200056 fog lamp focuses light into a broad, low beam that improves visibility directly ahead of the vehicle in fog, rain and spray while helping to minimise glare for other road users.
• Housing and lens materials are selected for resistance to stone-chipping, vibration and moisture so the 9408200056 fog lamp can maintain clarity and structural integrity through demanding daily fleet use.:contentReference[oaicite:9]{index=9}
• When combined with correct wiring practices, appropriate bulb choice and regular inspection, the 9408200056 fog lamp can be integrated into fleet maintenance programmes that target long-term lighting reliability on MERCEDES-BENZ distribution and long-haul trucks.

Installed and checked by competent technicians, the 9408200056 fog lamp contributes to consistent, compliant forward lighting performance on 2004–2013 MERCEDES-BENZ Atego and Axor vehicles operating in a wide range of climates and duty cycles.