0028208656 fog lamp is designed as a left-side front fog light that mounts into bumpers on vehicles suitable for and compatible with MERCEDES-BENZ Actros, Axor and Atego 2 trucks. Supplied without bulbs and without E-marking, it is aimed at workshop, fleet and export markets that require an auxiliary lamp upgrade or replacement for low-speed manoeuvring in poor weather, depot yards and loading areas.

The housing and lens geometry of the 0028208656 fog lamp follow the original bumper opening used on many vehicles suitable for and compatible with MERCEDES-BENZ Actros (from around 1996), Axor (from around 2001) and Atego 2 / Axor 2 (from around 2004). Cross references such as 0028207856 confirm that mounting points, envelope size and connector position are closely aligned, helping the lamp sit correctly in the bumper recess without stressing clips or trim components.

On long-haul tractors, distribution rigids and regional chassis suitable for and compatible with MERCEDES-BENZ heavy trucks, this left-side fog lamp helps illuminate the road edge, kerbs and yard markers at low speed in rain, fog or snow, supporting safer manoeuvring. The compact design integrates into the lower front area, complementing headlamps and marker lamps without significantly altering the vehicle’s visual identity.

When installed with suitable bulbs, wired correctly and inspected regularly for lens cleanliness and secure mounting, the 0028208656 fog lamp can support consistent, practical lighting performance for fleets operating vehicles suitable for and compatible with MERCEDES-BENZ Actros, Axor and Atego 2 platforms through demanding duty cycles.

• Left-side fog light supplied without bulbs and without E-marking, suitable for and compatible with MERCEDES-BENZ Actros, Axor and Atego 2 trucks.
• 0028208656 fog lamp is typically mounted low in the bumper to improve close-range lighting in fog, rain and depot operations at modest speeds.
• Housing dimensions and fixing layout follow bumper apertures used on multiple generations of vehicles suitable for and compatible with MERCEDES-BENZ Actros (1996–), Axor (2001–) and Atego 2 / Axor 2 (from around 2004).
• Intended for 24 V commercial-vehicle systems; specific bulb type and wattage should follow workshop and local regulatory guidance.

• Use the 0028208656 fog lamp as the core left-side fog light reference for fleets operating trucks suitable for and compatible with MERCEDES-BENZ Actros, Axor and Atego 2 to simplify stock control.
• Record the secondary reference 0028207856 once in catalogue and ERP systems while printing 0028208656 as the primary code on outer cartons and labels.
• Offer bumper lighting kits that combine left and right fog lamps for service partners focusing on vehicles compatible with MERCEDES-BENZ heavy trucks in Europe and export markets.
• Plan buffer stock around seasonal peaks where fog, snow and heavy rainfall increase the demand for bumper-mounted fog lamp replacements.
• Provide private-label packaging and digital catalogue data so distributors can present this fog lamp clearly for fleets suitable for and compatible with MERCEDES-BENZ Actros, Axor and Atego 2 chassis.

• Park the truck suitable for and compatible with MERCEDES-BENZ Actros, Axor or Atego 2 on level ground, apply the parking brake and isolate the electrical supply before working near the 0028208656 fog lamp or wiring.
• Access the rear of the bumper aperture by removing the necessary trim covers or splash guards, supporting the old lamp as you undo fixings from the mounting points.
• Disconnect the fog lamp connector and inspect terminals, seals and nearby wiring for corrosion or heat marks; repair any defects before installing the replacement fog lamp.
• Position the 0028208656 fog lamp in the left bumper opening so its tabs and mounting holes align with bumper brackets used on vehicles suitable for and compatible with MERCEDES-BENZ Actros, Axor and Atego 2, then tighten screws evenly.
• Install the correct bulb type as specified by workshop documentation, reconnect the harness and test fog lamp function, checking that the beam pattern is aligned and the lamp is securely seated.

• Primary reference: 0028208656 – left fog lamp without bulbs, suitable for and compatible with MERCEDES-BENZ Actros, Axor and Atego 2 bumper applications.
• Secondary reference (single mention): 0028207856, listed in some catalogues as an interchangeable left fog lamp code in the same family.
• Typical applications cover trucks suitable for and compatible with MERCEDES-BENZ Actros (circa 1996 onwards), Axor (circa 2001 onwards) and Atego 2 / Axor 2 (circa 2004 onwards), depending on bumper and lighting configuration.

The 0028208656 fog lamp is provided as a left-side bumper-mounted auxiliary lamp suitable for and compatible with MERCEDES-BENZ Actros, Axor and Atego 2 models. As this version is described without E-marking and without bulbs, workshops and operators must ensure that bulb choice, wiring and overall vehicle lighting configuration comply with applicable local regulations.

• Lens and housing materials are selected for durability under typical heavy-truck operating conditions, including spray from the road surface and occasional stone impact.
• When installed correctly, the 0028208656 fog lamp can enhance close-range lighting performance on vehicles suitable for and compatible with MERCEDES-BENZ Actros, Axor and Atego 2 fleets.
• Regular inspection of wiring, connectors, lens clarity and mounting security is recommended to maintain stable performance in demanding commercial use.

All installation and use of this fog lamp should follow local lighting regulations and recognised workshop practices for vehicles suitable for or compatible with MERCEDES-BENZ heavy trucks.